公司简介
Sercalo Microtechnolgy was founded in 1999. The company has the ambition of producing high quality and top performance MOEMS (Micro-Opto- Electro-Mechanical Systems) components. The management and Engineering team counts with more than 20 years of experience and expertise in the MEMS and fiber optical components area. Their skills span all the process of manufacture: MEMS chip design, fabrication and marketing.
技术能力
产品列表
MEMS VOA - BROAD RANGE
BROAD BAND VOA
The VP series Variable Optical Attenuators (VOA) achieve lower insertion loss and better Polarization Dependent Loss characteristics. The VP Sercalo VOAs use a high impedance 0-5 V input port to set the attenuation.
SINGLE MODE
MINI SIZE VOA
The VX variant comes in a very small package and is ideally suited for integration in subsystems, where cost, size and performance are the most critical factors.
REFLECTION
TRANSMISSION
CO-AXIAL VOA
The Sercalo Co-Axial VOA is optimised for low cost applications without compromising reliability and performance. It works with an electrostatic MEMS mirror and comes in an industry standard TO 46 housing.
The VOA is hermetically sealed and Helium leak tested. The assembly is laser welded: it can widthstand harsh enviromental conditions up to 150°C.
SINGLE MODE
TUNABLE FILTERS
BARE COMPONENTS》TF- BARE COMPONENTS
 |  |
The bare tunable filter component is itended for direct mounting on PCBs. It is optimized for lowest size and is driven by a 0-44V voltage. Changing the voltage changes the wavelength of the bandpass filter.
Sercalo's MEMS tunable optical filter selects a wavelength out of a band. Different variants covering the C or L band are available. The FWHM defines the linewidth of the filter. Currently variants with 0.5 nm and 0.3 nm linewidh are available.
The optical engine only measures (L x W x H) 16 x 10 x 8.5 mm.
Smaller variants measuring only (L x W xH) 14x8x6 mm are in development. Applications range from simple hand held spectrometers to tunable receivers.
DRIVER BOARD INCLUDED
Sercalo's MEMS tunable optical filter selects a wavelength out of a band. Different variants covering the C or L band are available. The FWHM defines the linewidth of the filter. Currently variants with 0.5 nm and 0.3 nm linewidh are available.
The optical engine only measures (L x W x H) 16 x 10 x 8.5 mm. Even smaller variants measuring only (L x W xH) 14x8x6 mm are in development. Applications range from simple hand held spectrometers to tunable receivers.
SINGLE MODE
C-L-BandTunable...O-BandTunableFi...
MEMS SWITCHES - MAIN LINE
MINI SIZE SWITCHES 1X2, 2X2
The SXLA are latching type switches for telecom and test and measurement applications. The SXLA achieve excellent repeatability and reliability. The single mode SXLA switch passes GR1221 qualification.
SINGLE MODE
MULTI MODE
LATCHING
The SL series are fast, latching MEMS switches. They maintain the last switching state after power is removed. They are available in configurations 1x2, 2x2, 1x4 and 1x8 with a variety of driver options and a capacitive position sensor. The SL switches are the best choice where highest reliability and self test capability are required.
STANDARD
SL1x2SL1x4SL1x8RS232USBor...SL1x16RS232USBo...SL2x2
WITH POSITION MONITOR
CO-AXIAL 1XN
The Co-Axial 1xN MEMS switch is a very small 1xN switch. It's compact design offers a very low size and lower cost than Sercalo's standard switches. Nevertheless it has slower speed and larger wavelength dependent loss than the SW or SL types.
The component is currently not offered for sale in the United States of America.
SINGLE MODE
SC1x48-1x256SMF...SC1x4upto1x36
MULTI MODE
LOW COST 1X1, 1X2, 2X2
MEMS SWITCHES - FAST MEMS SWITCHES
NON LATCHING, HIGH SPEED
 |  |
The SW series are fast, non-latching MEMS switches available both for single mode and multimode fibers. They are available in configurations from 1x2 to 1x32. These switches are mainly used in test and measurement applications.
The MEMS switching structure achieves repeatability of 0.001 dB and doesn
SINGLE MODE
1xNwithinterfac...Co-Axial1xNswit...SW1x2SW1x4SW1x8SW1x13SW1x16SW1x24SW1x32SW1x36SW2x2
MULTI MODE
1xNwithRS232I2C...SW1x2-2x2MMSW1x4MMSW1x8MMSW1x13MMSW1x16MMSW1x24MMSW1x2StepIndexM...
SPECIALTY FIBERS
The SN series are fast, non-latching MEMS switches. Available in configurations from 1x2, 2x2 and 1x4; they are the best choice where low insertion loss and low PDL are most important. The SN switches are also available for a wide variety of specialty single mode fibers such as 630 nm, 780 nm, 850 nm, 980 nm and also polarization maintaining fibers.
SINGLE MODE
SN1x2sn1x2PMspecialw...SN1x4sn1x4PMspecialw...SN2x2
POLARISATION MAINTAINING
MINI SIZES SWITCHES
Sercalo's SXNT and SXLT series are fast switches for regular Test and Measurement applications. For applications where high reliability is required the newer SXLA variant should be chosen.
SINGLE MODE
MULTI MODE
MEMS SWITCHES - OPTICAL CROSS CONNECTS
MATRIX SWITCHES
Sercalo's Matrix Switches are non-blocking switches that connect any of the input fibers to any of the output fibers. Available in 4x4, 4x8 and 8x8 these switches achieve low insertion loss and high repeatability.
16X16 up to 32x32 Optical cross connects are currently in development and will be availabe early 2016.
MATRIX
SL4x4-SMF-MMSL4x8-SMF-MMSL8x8-SMF-MMOXC16x16-SMFOXC32x32-SMF
MEMS SWITCHES - MOUNTABLE RACKS
RACK MOUNTABLE SWITCH AND VARIABLE OPTICAL ATTENUATORS WITH ETHERNET INTERFACE
 |  |
Sercalo provides a range of high-performance optical switching solutions for manufacturing, research, and development. With its unmatched solid state performance Sercalo's fiber optic switches are the ideal choice for the most demanding applications including network protection and reconfiguration, single or multi-mode testing and manufacturing, and sensor networks.
The RS Series are all optical switch solutions for demanding applications in fiber optic instrumentation or communication. The rack mountable instrument can switch up to 4 input fibers to any of up to 48 output fibers, independently of data format, wavelength or optical power. The switch supports either single or multi-mode fibers.
BENCH TOP
TABLE TOP SWITCH FOR LABORATORY AND FIELD USE WITH BOTH COMPUTER INTERFACE AND MANUAL OPERATION
The BS Series are fiber optic switch solutions with USB interfacxe for test and measurement applications in laboratory or field use. The instrument integrates Sercalo
CUSTOM FIBER SWITCH SYSTEM
NETWORK SIMULATOR
Sercalo's Custom Fiber Optic Switch System allows the user to have a configurable equipment to cover his specific simulation and testing needs.
The Custom Fiber Optic System is conceived as a collection of building blocks which can be chosen by the costumer. The heart of the system are the Sercalo MEMS optical switches, variable optical attenuators, couplers, splitters together with kilometers of fiber divided into sections. All integrated in the same instrument to achieve costumer's needs in fields such as measurements, simulations and testing.
The system's inputs are basically the fiber optical inputs and the control inputs. For the moment a serial input (RS232) is available. The outputs available for measurement are the optical fibers themselves together with outputs to measure the energy, s/n ratio, and BERT.
The advantage of Sercalo's switches are their wide wavelength range which covers the full bandwidth of the fiber used. When working with standard SMF fiber a single instrument can cover the full spectrum between 1250 nm up to 1650 nm. For multimode the standard spectrum spans from 700 to 1700 nm.
SPECIALTY MEMS - MEMS MIRRORS
MEMS GALVANOMETERS
Sercalo's MEMS Galvanometer is a miniature scanner for advanced optical beam steering and pointing. It can be used for static or dynamic beam steering. The 1-D has an optical position monitor for closed loop operation. It has a mirror diameter up to 14 mm. It's best suited in applications where small size and low power consumption are important. It offers a response time of 1 ms and a mechanical rotation of +/- 5
The 2-D devices are operated in open loop and are currently available with a mirror diameter of 2.5X3.6mm.
TECHNICAL SPECS
90-1177-2MMxxx-...90-1184-3MDU8090-1192-2MM2536...
MICRO MIRRORS
Electrostatic Micro-mirrors
Sercalo produces MEMS Micromirrors based on different technologies:
Electrostatic driven MEMS mirrors are used in applications where a high pointing stability is required. The electrostatic drive has better DC performance and is the solution of choice for advanced fiber optic light processing such as in MEMS variable optical attenuators, fiber optic switches and tunable optical filters. Mirror diameters range from 0.8 mm up to 2.5 x 2.0 mm.
The Magnetic MEMS micro-mirrors offer larger diameters and are best suited in applications requiring DC pointing together with dynamic scanning. Magnetic 1-d and 2-d micromirrors have a linear current angle response.
Sercalo's engineering team designs, manufactures and tests each component assuring in this way the high quality and reliability that characterize all Sercalo products.
TECHNICAL SPECS
1mm3DegMEMS2DMI...25x2mm4DegMEMS2...ElectrostaticME...
SPECIALTY MEMS - SILICON WATCH COMPONENTS
SILICON MICROPARTS
Silicon micromechanics offers unrivalled precision. Sercalo produces as a kind of "foundry sercice" single and multi-level parts in silicon. Applications are found in watchmaking, precison springs and ultra flat mechanical parts.
TECHNICAL SPECS
OpticalAlignmen...SiliconWatchCom...
应用领域
