公司简介

美国Electro Optical Components公司成立于1987年，专为全球的高功率激光系统用户提供元件和诊断设备，目前产品包括法拉第旋转器和光学与激光二极管,光电隔离器、光电探测器、激光准直仪等。

产品列表

AMPLIFIERS / PHOTORECEIVERS  

Current amplifiers:
Fixed gain: ultra low noise, miniature ultra low noise,  high speed
Variable gain: ultra low noise, low noise, high speed, 2 channel

Charge Amplifiers

Voltage amplifiers:
   Fixed gain: Wideband
   Variable gain: up to 100 kHZ, up to 100 MHz/200 MHz, up to 1.2 GHz, High speed, Logarithmic, Compact

Lock-in amplifiers: 
   Standard, Compact, EURO Card PCB & Modules

Photoreceivers - Si / InGaAs: Up to 200 MHz, High Speed, Balanced, Custom

Compact amplifiers

Low Ripple Power Supply

Amplifier Interface Software

SENSORS / DETECTORS / PHOTODIODES

NDIR Gas Sensors / Detectors Pyroelectric Detectors / Sensors  Thermopile Detectors / Sensors / Arrays  PbS and PbSE  infrared detectors Pulsable IR Sources	EOC offers several solutions for NDIR gas detection and sensing.  Pyroelectric detectors / sensors are reliable; Thermopile detectors / sensors / arrays are easy to use; and PbS and PbSe infrared detectors are fast and very sensitive. Pulsable IR Sources improve the response of Pyroelectric, Thermopile or PbS and PbSe infrared sensors and detectors in a nondispersive infrared gas detection system.
IR Flame Detection System	Flame Detection Systems using Pyroelectric detectors / sensors are reliable and cover a broad IR band; PbS and PbSe infrared detectors are fast and very sensitive.
InGaAs Infrared Detectors InGaAs Infrared Linear Arrays	InGaAs Infrared Detectors and InGaAs Infrared Linear Arrays are the solution for near infrared (NIR) detection / sensing. These detectors are very fast and very sensitive.
Mid-IR Photodiodes & Narrowband LEDs	The “solid state” way of detecting in the Mid IR is to useMid-IR Photodiodes and Narrowband Mid-IR LEDs. The Mid-IR Photodiodes and Mid-IR LEDs are simple to operate and have fast response.
NDIR Gas Sensor Modules	Using NDIR Gas Sensor Modules from smartGAS, you can monitor fruit storage, SF6 gas in high voltage applications, emissions, gases in processes and refrigerant gases.
PbS and PbSE infrared linear arrays	PbS and PbSe infrared linear arrays are used for spectroscopy applications to monitor several wavelengths in the mid IR spectrum with densities up to 512 pixels the resolution is excellent.
Quadrant Silicon PIN Photodiodes	Quadrant Silicon PIN Photodiodes are used for beam positioning of visible light.
Quadrant IR Positioning Sensors	greenTEG offers Quadrant IR Positioning Sensors using high sensitivity quad sensors effective for all wavelengths from UV to MIR. The Quadrant IR Positioning Sensors measures position and absolute power sensing of laser beams.
Heat Flux and Radiation Sensors	greenTEG offers Heat Flux and Radiation Sensors(gRAY®) as well as Thermoelectric Generators (gSKIN®). The gRAY® Radiation Sensor is especially suited for measuring laser power and solar radiation. Other applications include thermal measurements in buildings and calorimetry. gSKIN®s are used for a variety of Heat Flux measurement.
Silicon Photodiodes with Low Noise Amplifier Photoreceivers - Si / InGaAs	FEMTO couples Silicon Photodiodes with Low Noise Amplifiers for high gain for weak signals. Photoreceiverswith Si and InGaAs photodiodes are available.
Temperature Sensor Modules / Radiometers	Micro-Hybrid’s thermopiles are excellent Temperature Sensor Modules or Radiometers.
UV Photodiodes - SiC / GaN / GaP  SiC UV Photodetectors / photodiodes GaN UV Photodiodes / detectors UV-Visible Photodiodes UV Monitors / Meters / Radiometers UV Probes / UV Sensor Boards	EOC offers solutions for UV detection and monitoringusing solar blind UV photodiodes / detectors made from Silicon Carbide (SiC) for high performance andGallium Nitride (GaN) for medium performance. These detectors can be used in UV Probes and UV Sensor Boards. Additional applications include UV Monitors, Meters and Radiometers. If you want to monitor UV and Visible light, the UV-Visible Photodiodes are the solution.
UV-NIR Spectroscopy Photodiodes	For a detector or sensor in the range of 220 - 1100nm, the IFW UV-NIR Spectroscopy Photodiodes are the solution.
Bio and Chemical Sensors Diamond UV / X-Ray Detectors Gamma (y) Ray Radiometer	EOC offers diamond detectors for Diamond UV and X-Ray Detectors, Bio and Chemical Sensors and Gamma (y) Ray Radiometers. Diamond superior properties are effective for light sources as well as for detecting minimum ionizing particles in High Energy Physics applications where the detector is exposed to high doses of radiation. Diamond detectors are also used for beam alignment in high beam energy applications.
Acceleration, Inclination & Tilt Sensors	Acceleration, Inclination and Tilt Sensors are based on the principle of difference capacitance and are made for heavy outside applications in industry and agriculture. EOC offers Acceleration, Inclination and Tilt Sensors are lightweight, robust and resistant to fuel, oil, seawater and a lot of chemicals.
Thread Tension Sensors	Micro-Sensor's Thread Tension Sensors use the same principles measuring thread tension in textile machines and wire production. They measure the force of a yarn, thread or wire with high precision.

Laser Diode Modules, Fiberoptics and Accessories

IMM Capabilities Brochure

Fiberoptic Laser Diodes & Receivers Wavelength (nm): 405 - 1550	IMM Photonics GmbH offers a full line of Fiber Coupled Fiberoptic Laser Diodes & Receivers.
Laser Diode Modules, High Power Laser Diode Modules and Laser Diode Collimators	IMM offers a variety of laser diode modules that arecollimated, small in size, have adjustable focus and produce Gaussian laser lines.  IMM offers the High-Power Laser ilumLAS HP series of lasers with wavelengths from 445 to 1850nm and optical power up to 6.6W. IMM offers a variety of Green Laser Diode Modules for applications like pilot laser, positioning and marking.
Fiber Coupled Laser Diodes for Pumping DPSS Lasers Wavelength (nm): 660, 808, 830, 915, 940, 976, 980 Fiber Coupled Laser Diode Modules for Medical Applications Wavelength (nm): 650-1064 Wavelength Stabilized Laser Diode Modules Wavelength (nm): 785, 830, 976, 1064 Laser Diode Modules with Aiming Beam Wavelength (nm): 808, 915, 940, 976, 980, 1064 Dual and Three Wavelength Laser Diode Modules Wavelength (nm): 650, 785, 808, 980, 1064 Narrow Line Width Laser Diode Modules Wavelength (nm): 808 Biophotonic and Fluorescence Laser Diode Modules Laser Diodes Lasers for Raman Spectroscopy Wavelength (nm): 785, 830 & 1064	RealLight has a broad array of Fiber Coupled Laser Diodes for Pumping DPSS Lasers. RealLight also offers Fiber Coupled Laser Diode Modules for Medical Applications. If you need Wavelength Stabilized Laser Diode Modulesthen RealLight has several options. If you need an aiming beam then the RealLight Laser Diode Modules with Aiming Beam are available in several wavelengths and power levels. Several versions of the RealLight Dual and Three Wavelength Laser Diode Modules are available. If you need a laser line width less than 5nm then the RealLight Narrow Line Width Laser Diode Modules are the answer. For biophotonic and fluorescence applications RealLight has Biophotonic and Fluorescence Laser Diode Modules. For Raman Spectroscopy RealLight has a variety ofWavelength Stabilized, Narrow Line Width Laser Diode Modules
Laser Diode High Speed Pulse Driver	Linear Design Inc. provides excellent standard and custom Laser Diode High Speed Pulse Drivers.
Fiberpoint™ Fiber Testing Device Wavelength (nm): 635, 650 Fiberoptic Components and Accessories Wavelength (nm): 405 - 1550 Receivers (Photodetectors), Fiberoptic Wavelength (nm): 760, 850 & 1310	IMM produces a series of high quality FIBERPOINT® Fiber Fault Locators / Fiber Test Devices with universal adapter in order to test single and multi-mode glass fibers and other fiber-optic components for breakage or defaults.  Standard Fiber Optic Components are available from IMM in different receptacles and pigtail versions.
Fiber Arrays	Fiber Arrays are available from RealLight.
Mid IR LEDs Wideband Photodiodes	LED Microsensor NT manufactures a full range of Mid IR LEDs and complimentary Wideband Photodiodes.
Handheld & Industrial UV Curing Systems	The handheld ilumCURE UV Curing System is a portable UV light source for curing UV activated adhesives and coatings. It is in a robust casing designed for field work. Its battery charge lasts 3.5 hours. The high efficiency LEDs of the ilumCURE cures most adhesives in a few seconds. You can charge the ilumCURE using any available USB port (PC, Laptop, car, etc.).
Specialty Fibers and Fiber Cables Spectroscopy Fiber Probes Fiber Optic Bundles and Converters  Accessories for Mid IR Fiber Spectroscopy and Biophotonics	Art photonics GmbH offers Specialty Fibers and Fiber Cables, Spectroscopy Fiber Probes, Fiber Optic Bundles and Converters, and Accessories for Mid IR Fiber Spectroscopy and Biophotonics.

HIGH VOLTAGE DRIVERS / MODULATORS / PULSE GENERATORS

Electro Optic Modulators

Spatial Light Modulator

High Voltage Drivers / Modulators

High Voltage Pulse Generators

Specialty High Voltage Power Supplies

IR Filter Mid Infrared Filters: 1.5 - 20 μm

Competitively priced standard and non-standard IR filters for detector applications

Stock IR Filters Check the Stock IR Filter list for your requirement: Narrow bandpass (NBP) | NBP Filter Scans Wide bandpass (WBP) | WBP Filter Scans Anti reflective (AR) Coatings | AR Coating Scans Long wave pass (LWP) | LWP Filter Scans Shortpass Filters Neutral Density Filters
Custom IR filters When you can't find a stock IR filter for your requirement, we can help you with custom filters.
Related Products: UV filters (200-400 nm)  Pyroelectric sensors / detectors  Thermopile detectors / sensors

IR Filter Technology

Infrared - IR - filters are normally combinations of thin film deposition interference filters. Out of band blocking can be achieved by the proper choice of substrate, reflectance filter stacks or by adding absorption glass.

The thin film infrared filters are comprised of stacks of thin layers (of different optical materials) in controlled thicknesses. Light is reflected at each film interface and by the correct choice of parameters can be made to interfere with that from other interfaces, constructively for certain wavelengths giving high reflectance, and destructively for others giving high transmittance. Long wave pass, short wave pass and bandpass filters can be designed and manufactured in this way.

4260nm CWL, 90nm BW Narrow Bandpass Filter	3000-5000 nm Wide Bandpass Filter

Mid IR Filter and Coating Types

Narrow Bandpass Filters (NBP)  |  NBP Filter Scans
Narrow bandpass IR filters are designed to isolate a narrow region of the infrared spectrum. This is accomplished using a complex process of constructive and destructive interference.

Wide Bandpass Filters (WBP)  |  WBP Filter Scans
Wide bandpass filters are designed to isolate a very wide spectral band. They are classified by having bandwidths (measured at half peak transmittance levels) greater than 13%.

Long Wave Pass Filters (LWP)  |  LWP Filter Scans
Long Wave Pass filters (also referred to as edge filters) are constructed from stacks of thin layers. They are distinguished by a sharp transition from a zone of rejection to a zone of transmission.

Short Wave Pass Filters (SWP)
Short wave pass filters are distinguished by a sharp transition from a zone of transmission to a zone of rejection.

Neutral Density Filters 
The majority of neutral density filters offered are manufactured with a metallic coating which attenuates incident light by both reflection and absorption.

AR (Anti-Reflection) Coatings  |  AR Coating Scans
Capabilities in anti-reflection coatings range from single layers to advanced high efficiency multi-layer coatings. These coatings can be applied to windows, lenses or customer supplied substrates. 

INFRARED (IR) & VISIBLE SOURCES / CHOPPERS

Pulsed & High Power Broadband IR Sources	Micro-Hybrid Electronic GmbH produces high power steady state (CW) and pulsed IR sources for NDIR application. The JSIR350 series can be pulsed at high frequencies.
High Power Pulsable IR Sources	EOC offers a variety of high power sources that can be pulsed up to 9 Hz.
High Power Steady State IR Sources	EOC also has a variety of high power steady state (CW) IR sources.
CW High Power IR Source for Spectroscopy, NDIR and FT-IR	The EOC CW high power IR sources are also excellent for Spectroscopy, NDIR and FT-IR applications.
Mid IR Narrowband LEDs & Photodiodes	Narrow band Mid IR LEDs and Broadband Mid IR photodiodes are a great solid state solution for NDIR when high frequency measurements or low power is required.
Infrared Pulsable Array	EOC’s family of pulsable infrared arrays provides broadband IR illumination for asset identification at medium to long range.

Laser Diode Modules, Fiberoptics and Accessories

IMM Capabilities Brochure

Fiberoptic Laser Diodes & Receivers Wavelength (nm): 405 - 1550	IMM Photonics GmbH offers a full line of Fiber Coupled Fiberoptic Laser Diodes & Receivers.
Laser Diode Modules, High Power Laser Diode Modules and Laser Diode Collimators	IMM offers a variety of laser diode modules that arecollimated, small in size, have adjustable focus and produce Gaussian laser lines.  IMM offers the High-Power Laser ilumLAS HP series of lasers with wavelengths from 445 to 1850nm and optical power up to 6.6W. IMM offers a variety of Green Laser Diode Modules for applications like pilot laser, positioning and marking.
Fiber Coupled Laser Diodes for Pumping DPSS Lasers Wavelength (nm): 660, 808, 830, 915, 940, 976, 980 Fiber Coupled Laser Diode Modules for Medical Applications Wavelength (nm): 650-1064 Wavelength Stabilized Laser Diode Modules Wavelength (nm): 785, 830, 976, 1064 Laser Diode Modules with Aiming Beam Wavelength (nm): 808, 915, 940, 976, 980, 1064 Dual and Three Wavelength Laser Diode Modules Wavelength (nm): 650, 785, 808, 980, 1064 Narrow Line Width Laser Diode Modules Wavelength (nm): 808 Biophotonic and Fluorescence Laser Diode Modules Laser Diodes Lasers for Raman Spectroscopy Wavelength (nm): 785, 830 & 1064	RealLight has a broad array of Fiber Coupled Laser Diodes for Pumping DPSS Lasers. RealLight also offers Fiber Coupled Laser Diode Modules for Medical Applications. If you need Wavelength Stabilized Laser Diode Modulesthen RealLight has several options. If you need an aiming beam then the RealLight Laser Diode Modules with Aiming Beam are available in several wavelengths and power levels. Several versions of the RealLight Dual and Three Wavelength Laser Diode Modules are available. If you need a laser line width less than 5nm then the RealLight Narrow Line Width Laser Diode Modules are the answer. For biophotonic and fluorescence applications RealLight has Biophotonic and Fluorescence Laser Diode Modules. For Raman Spectroscopy RealLight has a variety ofWavelength Stabilized, Narrow Line Width Laser Diode Modules
Laser Diode High Speed Pulse Driver	Linear Design Inc. provides excellent standard and custom Laser Diode High Speed Pulse Drivers.
Fiberpoint™ Fiber Testing Device Wavelength (nm): 635, 650 Fiberoptic Components and Accessories Wavelength (nm): 405 - 1550 Receivers (Photodetectors), Fiberoptic Wavelength (nm): 760, 850 & 1310	IMM produces a series of high quality FIBERPOINT® Fiber Fault Locators / Fiber Test Devices with universal adapter in order to test single and multi-mode glass fibers and other fiber-optic components for breakage or defaults.  Standard Fiber Optic Components are available from IMM in different receptacles and pigtail versions.
Fiber Arrays	Fiber Arrays are available from RealLight.
Mid IR LEDs Wideband Photodiodes	LED Microsensor NT manufactures a full range of Mid IR LEDs and complimentary Wideband Photodiodes.
Handheld & Industrial UV Curing Systems	The handheld ilumCURE UV Curing System is a portable UV light source for curing UV activated adhesives and coatings. It is in a robust casing designed for field work. Its battery charge lasts 3.5 hours. The high efficiency LEDs of the ilumCURE cures most adhesives in a few seconds. You can charge the ilumCURE using any available USB port (PC, Laptop, car, etc.).
Specialty Fibers and Fiber Cables Spectroscopy Fiber Probes Fiber Optic Bundles and Converters  Accessories for Mid IR Fiber Spectroscopy and Biophotonics	Art photonics GmbH offers Specialty Fibers and Fiber Cables, Spectroscopy Fiber Probes, Fiber Optic Bundles and Converters, and Accessories for Mid IR Fiber Spectroscopy and Biophotonics.

OPTICS & COATINGS  

Attenuators

Beam Shaper for Lasers  |  Beam Expander for Lasers

Biocompatible Coatings  |  High Temperature Biocompatible Coatings

Broadband & Ultra Wide Band Faraday Optical Isolators

CO2 Laser Reflective Mirrors
Applications for Laser Beam Products gold coated mirrors include CO₂ laser mirrors, Er;YAG lasers, Near IR, Far IR, Quantum Cascade Lasers (QCL), Phase Retarding CO₂ Mirrors and High power Fiber Lasers

Diamond optics

Faraday Optical Isolators / Rotators

Germanium Windows / Substrates

KD*P / ADP / RTP / Lithium Niobate

Optical Components

Polarizers

Q-switches / Pockels Cells

Sapphire Windows / Substrates

Spatial Light Modulator

Spectral Imaging and Hyperspectral Imaging

LED Line Lighting

Stepper Table and Accessories