400-863-9100

Advanced Laser Diode Systems(A.L.S GmbH)(德国)

http://www.alsgmbh.com

公司简介

Advanced Laser Diode Systems公司成立于2002年,公司位于德国柏林东南有光子中心之称的Adlershof。A.L.S专注于生产和开发广泛应用于工业和科研的高效率的半导体激光系统及其配件。2008年,A.L.S被总部瑞士苏黎世的Onefive公司收购,A.L.S的主要产品为超快半导体皮秒激光器系统和超快光电检测器。现已被NKT Photonics公司收购。


产品列表

Picosecond gain switched laser diode module for OEM and R&D applications
(Please contact us for other wavelengths, pulse widths, power )
PiL---Xwavelength
(nm)
tolerance
(nm)
spectral width
(nm)
pulse width
(ps) ¹
peak power
(mW) ²
avg. Power
(mW) ³
PiL037X375± 10< 5< 45> 3002
PiL040X405± 15< 5< 45> 3002
PiL044X440± 20< 5< 70> 1501.5
PiL047X470± 10< 5< 60> 1501.5
PiL048X480± 10< 5< 60> 1001
PiL051X510± 20< 10< 140> 1001
PiL063X635± 15< 7< 45> 2001.5
PiL067X665± 15< 7< 45> 2001.5
PiL069X690± 15< 7< 50> 2001.5
PiL072X720± 30< 7< 50> 2001.5
PiL077X770± 20< 7< 50> 1001
PiL080X805± 20< 7< 50> 1001
PiL083X830± 15< 10< 50> 1001
PiL085X850± 15< 10< 50> 1001
PiL088X880± 20< 10< 50> 1001
PiL090X905± 15< 10< 50> 1001
PiL094X940± 20< 10< 50> 1001
PiL098X980± 20< 10< 50> 1001
PiL103X1030± 20< 15< 60> 1001
PiL106X1060± 20< 15< 60> 1001
PiL131X1310± 20< 15< 35> 500.5
PiL155X1550± 20< 15< 35> 500.5
PiL199X1990± 50< 50< 80> 1001







PiL085DFBX852± 2< 0.5< 90> 1000.5
PiL106DFBX1064± 2< 0.5< 60> 1000.5
PiL131DFBX1310 ⁴± 20< 0.5< 30> 500.5
PiL155DFBX1550 ⁴± 20< 0.5< 30> 500.5
¹ Minimum pulse widths depend on repetition rate.
² Peak power for collimated beam. Fiber coupling will reduce peak power. Corresponding pulse energy depends on pulse width. Range is from 1pJ to 50pJ for near Gaussian pulses. Higher pulse energy at the expense of pulse shape is possible with increased pulse duration up to 1 or 2ns. Maximum repetition rate will be limited in that case.
³ Typical average output power for collimated beam at 100 MHz is given. Average power depends on repetition rate. For repetition rate above 80MHz a passive heat sink for the laser head is required for long time operation.
⁴ The wavelength is selectable within C- and O-Band.


Specifications of MSM Photo Detectors UltraFast

UltraFast-20-xx
detector typeMSM (Metal – Semiconductor – Metal)
active materialInGaAs
bandwidth (-3 dB electrical)
DC – 20 GHz
rise time (10% - 90%)< 12 ps
pulse width (FWHM)< 20 ps
wavelength range<400 nm – 1.6 µm
maximum responsivity*0.24 A/W @ 810 nm
0.19 A/W @ 1.3 µm
0.12 A/W @ 1.5 µm
bias voltage2 V – 9 V
bias input connectorSMC male
standard RF signal output connectorK-Type female
* Dependent on the coupling scheme, the values for the responsivity can be lower

ALS GmbH reserves the right to change specifications without prior notice.


Options
UltraFast-20-xxDescription
SMOptical Input: 
Single Mode Fiber 9 µm core with FC/PC Connector
MMOptical Input:
50 µm or 62.5 µm Multi Mode Fiber with FC/PC Con­nector
FS
Optical Input: Free Space


Accessories
UltraFast-20-xxDescription
BCBias Supply Cable. Cable for the connection to an external voltage supply with SMC connector. (Detector SMC to male BNC). Cable length 1.5 m. For customers using their own DC-bias-source.
BBBattery Supply Box. (Voltage supply for all UltraFast photo detec­tors with SMC connector). For 6 V bias (+/-) incl. supply cable. Small battery case incl. two long lasting replaceable 3 V lithium coin cells and connector cable to SMC; cable length 0.5 m.r
KMRF connector K-Type Male (instead of standard K-type female)
C1Collimator Optics with FC/PC connector for the connection of fiber cables f = 11 mm; for wavelengths 350 – 600 nm
C2Collimator Optics with FC/PC connector for the connection of fiber cables f = 11 mm; for wavelengths 600 – 1050 nm
C3Collimator Optics with FC/PC connector for the connection of fiber cables f = 11 mm; for wavelengths 1050 – 1550 nm
FOFocusing Optics (f = 6 mm) for the free space version “UltraFast 20 FS” with a hole aperture 1.0 mm diameter
MAMounting Adapter for C1 - C3e
MHMirror Holder. For 1" optics fitting to mounting adapter MA
ACOptical input FC/APC connector (angle 8° for reduced back reflexion)


Ultra-low-noise soliton femtosecond laser module designed for OEM and R&D applications
 

• Excellent pulse quality – pedestal-free transform-limited soliton pulses

• Clean sech2-shaped optical spectrum

• No Kelly-sidebands – no spectral ripple

• Diffraction-limited beam quality

• Lowest phase noise/timing jitter available on market

• Shot noise limited relative intensity noise

• No amplifier built in – no ASE noise

• High repeatability and 24/7 operation

• Compact, dust-sealed OEM package

• Plug & play

• Passively air cooled – no water cooling

• Low power consumption

• Remote control

• One-button operation – no adjustment knobs or screws

• Maintenance free – no user-serviceable parts inside or outside laser

Laser specificationsOrigami – 05Origami – 08Origami – 10Origami – 15Origami – 17
Center wavelength513 - 535 nm765 - 785 nm1025 - 1070 nm1530 - 1586 nm1580 - 1700 nm
Pulse duration¹·²< 100 – 230 fs< 130 – 200 fs³< 90 – 400 fs< 100 – 500 fs< 200 – 300 fs
Avg power (up to)²100 mW30 mW250 mW120 mW50 mW
Pulse energy (up to)²1.2 nJ0.7 nJ5 nJ2 nJ1 nJ
Peak power up to)²10 kW4.5 kW30 kW15 kW3 kW
Pulse repetition rate²20 MHz – 1.3 GHz
PER>23 dB
Amplitude noise (24h)< 0.2% rms, < 0.5% pk-pk (24h)
For more information see datasheet on the right.


分享到 :