公司简介
Analog Devices, Inc. defines innovation and excellence in signal processing. ADI's analog, mixed-signal, and digital signal processing (DSP) integrated circuits (IC) play a fundamental role in converting, conditioning, and processing real-world phenomena such as light, sound, temperature, motion, and pressure into electrical signals to be used in a wide array of electronic equipment.
产品列表
A/D Converters (ADC) [3]
| 8-Channel DAS with 16-Bit, 800 kSPS Bipolar Input, Simultaneous Sampling ADC | Recommended for New Designs | |
| 16-Bit, Isolated, Sigma-Delta ADC | Recommended for New Designs | |
| 16-Bit, Isolated Sigma-Delta Modulator | Recommended for New Designs |
Amplifiers [3]
| HMC1082 | GaAs pHEMT MMIC Medium Power Amplifier, 5.5 - 18 GHz | Recommended for New Designs |
| 10 MHz to 8000 MHz Bypass Amplifier | Recommended for New Designs | |
| 36 V, 18 MHz, Low Noise, Fast Settling Single Supply, RRO, JFET Op Amp | Recommended for New Designs |
Analog Functions [1]
| 175°C, Wide Supply 2.5V Precision Voltage Reference | Pre-Release |
D/A Converters (DAC) [1]
| Single-Channel, 16-Bit Current and Voltage Output DAC with Dynamic Power Control | Recommended for New Designs |
Interface & Isolation [3]
| Single Channel, 16-Bit Current/Voltage Output DAC with HART Connectivity | Recommended for New Designs | |
| 3.0 V to 5.5 V, ±12 kV IEC ESD Protected, 500 kbps/50 Mbps RS-485 Transceiver | Recommended for New Designs | |
| 5 kV RMS/3.75 kV RMS, Dual-Channel LVDS Gigabit Isolators | Pre-Release |
Optical Communications & Sensing [3]
| Multimodal Sensor Front End | Recommended for New Designs | |
| Multimodal Sensor Front End | Recommended for New Designs | |
| CCD TOF Signal Processor with Programmable Timing and V-Driver | Recommended for New Designs |
Power Management [7]
| 100V VIN and VOUT Synchronous 4-Switch Buck‑Boost DC/DC Controller with Pass-Through | Production | |
| 60V LED Driver with 4A Switch Current | Production | |
| Multiphase Boost Converter Expander with Internal Gate Drivers | Production | |
| 20V, 4-Channel Buck DC/DC with 8x Configurable 1.5A Power Stages | Production | |
| –20V, 200mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator | Production | |
| Quad DC/DC µModule Regulator with Configurable Dual 12A, Dual 5A Output Array | Production | |
| 5V, 6A Synchronous Step-Down Silent Switcher in 2mm x 2mm LQFN | Production |
Power Monitor, Control, & Protection [3]
| 54VIN Dual 25A, Single 50A µModule Regulator with Digital Power System Management | Pre-Release | |
| LTPoE++/IEEE 802.3bt PD Interface Controller | Production | |
| Negative Voltage Hot Swap Controller with Energy Monitor | Production |
Processors & DSP [2]
| Automotive Qualified, Dual-Channel, Precision ADCs with LIN2.2 Slave Interface | Pre-Release | |
| Bridge Sensor Signal Conditioner IC with LIN Interface, Nonlinearity Correction, Temperature Compensation | Recommended for New Designs |
RF & Microwave [7]
| 22 GHz to 38 GHz, GaAs, MMIC, Double Balanced Mixer | Recommended for New Designs | |
| 11 GHz to 20 GHz, Tunable Band-Pass Filter | Recommended for New Designs | |
| Dual-Channel, 2.4 GHz to 4.2 GHz Receiver Front End | Recommended for New Designs | |
| Wideband MMIC VCO with Buffer Amplifier 3.90 - 7.50 GHz | Recommended for New Designs | |
| 2.4 GHz to 4 GHz, Tunable Low-Pass Filter | Recommended for New Designs | |
| 9 GHz to 12 GHz, GaAs, MMIC, I/Q Downconverter | Recommended for New Designs | |
| Silicon SP4T Switch, Reflective, 100 MHz to 44 GHz | Recommended for New Designs |
